Technical data

Page
11 (34)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.point.fi
1.13 Switching the paper
• Pull the printer covers eject button upwards, so that it opens.
• Remove the previous paper roll from the printer tray.
• Place the new paper roll so that the paper moves from the bottom of the roll towards the
front edge.
• Leave a small amount of paper to extend outside the printer door.
• Close the printer cover.
• The terminal informs ”PAPER INSERTED PRESS ANY KEY”. Press any key to continue.
1.14 Testing the connection
From the main display, select the Reports menu by pressing its icon. After this, press enter and
select SEND BATCH. The screen informs DIALING. If the terminal successfully connects, the text
CONNECTED appears on screen. A white bar and the text RECEIVING are displayed on screen.
The bar turns gradually black as the batch sending progresses. The terminal downloads the
blacklist and other required card information files from the bank.
After this, the terminal is ready for use.
If the blacklist is not downloaded to the terminals memory, you can test the connection by
switching on the terminal.
The screen informs BLACKLIST MISSING UPDATE THE BLACKLIST? Press Enter, and the
terminal connects to the bank and downloads the blacklist and other required card information files.
If the connection is not working, see section 7 TROUBLESHOOTING for further information.
1
2
3