Technical data

Page
13 (34)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.point.fi
2.5 Time and date settings
Select TIME SETTINGS from the EDIT menu.
Choose ADJUST CLOCK.
Select the information you want to change, type in the new value and press Enter.
2.6 Fixed IP-address
If the terminal uses WLAN-connection, fixed IP-addresses must be defined to the terminal.
Select TCP/IP PARAMETERS from the EDIT menu and choose FIXED IP.
Activate IP address = the IP-address for the terminal
Default gateway = Default gateway
SUBNET MASK = Subnet mask
DNS 1 / DNS 2 = Terminal does not use DNS addresses
2.7 Power options
Select POWER OPTIONS from the EDIT menu.
Shut down timer = Time it takes that the terminal automatically shuts down. The time is indicated in
seconds (e.g. 180 = 3 min.) The terminal does not shutdown if it is connected to the power cord. If
the sleep timer is enabled the terminal also will not shut down. If you want to disable the shut down
timer, type 0 as the value.
Online bat percent = minimum battery reserve that the terminal requires to work. This is indicated
in percentage (e.g. 20).
Sleep timer = Time it takes that the terminal’s screen saver appears. This is indicated in seconds
(e.g. 90 = 1.5 min). The screen saver will not appear, if the terminal is connected to the power
cord. If you want to disable the screen saver, type 0 as the value.
2.8 Contrast
You can adjust the screen’s contrast from the CONTRAST-settings with the minus and plus icons.
Select the Menu icon from the screen and choose CONTRAST.
2.9 Sounds
To disable the terminal’s button sounds, select SOUND from the EDIT menu and choose OFF.