Technical data

Page
15 (34)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.point.fi
3. DOWNLOADS
3.1 Downloading applications
NOTE! The terminal should be kept still and connected to the power cord during the entire
download. It is not adviced to download the terminal e.g. in a moving vehicle. This might
disrupt the download.
Send the batch from the terminal before downloading.
To send the batch, select the Reports icon from the screen, press Enter and choose SEND
BATCH.
Select the Settings icon from the screen and press Enter.
Choose APP. DOWNLOAD
Select APP + PARAMS or ONLY APPLICATION
The terminal downloads the application. A white bar appears on the screen, which gradually turns
black as the download progresses.
NOTE! Parameters must be downloaded to the terminal after the application download has
ended. Guides for parameter downloading are listed below.
3.2 Parameter downloading
Select the Settings icon from the screen and press Enter.
Choose DOWNLOAD
Choose FROM LOADPOINT
Choose PHONE
The terminal downloads the parameters. A white bar appears on the screen, which gradually turns
black as the download progresses. The terminal prints on the paper “SUCCESSFUL
PARAMETERS DOWNLOAD”.
NOTE! After downloading the parameters, the terminal must connect to the bank. Select
Reports from the screen, press Enter and choose SEND BATCH.
3.3 Certificate downloading
The certificate is always already loaded to the terminal by Point.
Select the Settings icon from the screen and press Enter.
Choose DOWNLOAD
Choose DOWNLOAD CERTIFICATE
The terminal downloads the certificate and prints on the paper”SUCCESSFUL CERTIFICATE
DOWNLOAD”.