Technical data

Page
7 (34)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.point.fi
1.4 Technical data
Processor: 400 MHz ARM11, 32-bit RISC processor
Memory: 192 MB (128 MB Flash, 64 MB SDRAM) standard, can exceed up
to 500 MB. Optional micro SD Flash memory card
Display: 240 x 320 pixel color TFT (QVGA)
supports up to 26 lines x 26 characters
8 soft-function keys and 4 screen-addressable
keys via resistive touch screen
Swipe card reader: Triple track (tracks 1, 2, 3), high coercivity, bi-directional
Chip card reader: ISO 7816, 1.8V, 3V, 5V; synchronous and asynchronous cards
EMV Approved
SAM-card readers: 3 Security Access Modules (SAMs)
Keypad: 3 x 4 numeric keypad, plus screen addressable keys can be simulated
on resistive touch screen
Peripheral Ports: Single multi-port connector, which supports RS-232, USB Host, USB
Slave, and Integrated Charging
Connection: GPRS or WLAN
Printer: Integrated thermal with graphics capabilities,
18 lines per second, 22, 32, or 42 columns.
Paper roll width 40mm, diameter 40 mm.
Security: 3DES, Master/session and DUKPT key management; PED approved,
SSL, WPA
Battery: 1800 mA lithium-Ion Smart
Physical: Length 17.2 cm, max width 8.2 cm, height 6.2 cm, weight 477 g
1.5 Connecting the cables
Connect the adapter to the main power cord, the power cord to the power supply and the plug to
the electrical outlet. The adapter is connected at the bottom of the terminal into the left port.