Technical data

Page
8 (34)
POINT TRANSACTION SYSTEMS OY
Vanha Nurmijärventie 62 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.point.fi
1.6 Battery
The battery is attached by placing it on its slot and pressing it downwards.
To remove the battery, press the locking tab and pull the battery from its slot.
When the power cord is not connected to the terminal, it shows the state of the battery on the top
right corner of the screen. The text BAT and the bars on top of it indicate how much is left of the
battery. During normal use, the battery should be loaded when its indicator shows 1 bar or less.
The terminal starts charging the battery when it is connected to the power cord. When the battery
is charging, the LED-indicator blinks as an orange light. When the battery is fully charged the LED-
light turns green. When the battery is almost empty the light turns red. The terminal can be
connected to the power cord at all times; this does not affect the battery. It is recommended to
keep the terminal connected to the power cord during night time. This will charge the battery so
that it is fully charged at the start of the next work day, and also ensure the success of possible
automatic batch sendings during the night.