User's Manual
Table Of Contents
- Omni 5xxx and Vx5xx/Vx610 Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Telephone Line Connections
- Installing the Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Connecting Optional Device(s)
- Connecting the Terminal Power Pack
- Vx610 Battery Behavior (No Power Cord)
- Installing the Privacy Shield
- Installing the Vx610 Smart Battery
- Using the Vx610 Spare Battery Charger
- Using the Vx610 Power Cradle
- Installing/ Replacing the SIM Card (GSM/GPRS Models)
- Connecting the Vx610 External Antenna
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Blank Display
- Terminal Does Not Dial Out
- Printer Paper Jam
- Keypad Does Not Respond
- Peripheral Device Does Not Work
- Transactions Fail To Process
- Printer Does Not Print
- Terminal Display Does not Show Correct/ Readable Information
- Vx610 Terminal Does Not Start
- Vx610 Smart Battery Will Not Charge
- Printer Does Not Print
- Index
- Contact VeriFone
TERMINAL SETUP
Connecting Optional Device(s)
26 OMNI 5XXX AND V
X
5XX/V
X
610 INSTALLATION GUIDE
V
E
R I
F
O N E
C
O
N
F I
D E
N T
IA
L
T
E
M
P
LA
T
E
R
E
V
E
2 Insert the larger RJ45-type connector on the other end of the PINpad cable
into the PINpad serial port on the bottom of the terminal.
Figure 17 V
x
510 Example PINpad Serial Port Connections
Connecting USB Devices
The V
x
510 Desktop GPRS terminal can host certain USB devices. Contact your
VeriFone representative or visit online store at www.store.verifone.com for
information on these devices. Figure
18 provides an example of a peripheral
connection to the terminal USB port.
Figure 18 Example USB Connection