User's Manual
Table Of Contents
- Omni 5xxx and Vx5xx/Vx610 Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Telephone Line Connections
- Installing the Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Connecting Optional Device(s)
- Connecting the Terminal Power Pack
- Vx610 Battery Behavior (No Power Cord)
- Installing the Privacy Shield
- Installing the Vx610 Smart Battery
- Using the Vx610 Spare Battery Charger
- Using the Vx610 Power Cradle
- Installing/ Replacing the SIM Card (GSM/GPRS Models)
- Connecting the Vx610 External Antenna
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Blank Display
- Terminal Does Not Dial Out
- Printer Paper Jam
- Keypad Does Not Respond
- Peripheral Device Does Not Work
- Transactions Fail To Process
- Printer Does Not Print
- Terminal Display Does not Show Correct/ Readable Information
- Vx610 Terminal Does Not Start
- Vx610 Smart Battery Will Not Charge
- Printer Does Not Print
- Index
- Contact VeriFone
TERMINAL SETUP
Installing/Replacing the SIM Card (GSM/GPRS Models)
O
MNI 5XXX AND V
X
5XX/V
X
610 INSTALLATION GUIDE 39
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
T
E
M
P
L
A
T
E
R
E
V
E
4 Place the terminal onto power cradle.
Figure 38 Placing the V
x
610 Terminal Onto the Power Cradle
Installing/
Replacing the
SIM Card
(GSM/GPRS
Models)
The SIM (Subscriber Identity Module) card is a smart card inserted in the V
x
610
GSM/GPRS terminal that contains your GSM/GPRS radio account information.
Use the following procedure to replace or install a SIM card.
1 Loosen the screw from the GSM/GPRS sled module at the back of the V
x
610
terminal.
Figure 39 Loosen Retaining Screw