User's Manual
Table Of Contents
- Omni 5xxx and Vx5xx/Vx610 Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Telephone Line Connections
- Installing the Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Connecting Optional Device(s)
- Connecting the Terminal Power Pack
- Vx610 Battery Behavior (No Power Cord)
- Installing the Privacy Shield
- Installing the Vx610 Smart Battery
- Using the Vx610 Spare Battery Charger
- Using the Vx610 Power Cradle
- Installing/ Replacing the SIM Card (GSM/GPRS Models)
- Connecting the Vx610 External Antenna
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Blank Display
- Terminal Does Not Dial Out
- Printer Paper Jam
- Keypad Does Not Respond
- Peripheral Device Does Not Work
- Transactions Fail To Process
- Printer Does Not Print
- Terminal Display Does not Show Correct/ Readable Information
- Vx610 Terminal Does Not Start
- Vx610 Smart Battery Will Not Charge
- Printer Does Not Print
- Index
- Contact VeriFone
TERMINAL SETUP
Installing/Replacing the SIM Card (GSM/GPRS Models)
40 OMNI 5XXX AND V
X
5XX/V
X
610 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
T
E
M
P
L
A
T
E
R
E
V
E
2 Detach the GSM/GPRS sled module from the terminal.
Figure 40 Remove GSM/GPRS Sled Module
3 Insert the SIM into the cardholder at the back of the GSM/GPRS sled module.
Figure 41 Insert SIM Card Into GSM/GPRS Sled Module
NOTE
The SIM cardholder has a notch on one corner to ensure the SIM card is
positioned correctly and for easy orientation in the cardholder. Before inserting
the SIM card, position it as shown in Figure 41, with the card’s gold contacts
facing down.