User's Manual
Table Of Contents
- VX 520-G Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Installing or Replacing SIM Card
- Connecting Optional Devices
- Charging the Smart Battery
- Connecting the Terminal Power Pack
- Privacy Shield (Optional)
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- Troubleshooting Guidelines
- VeriFone Service and Support
- Index
- Contact VeriFone
VERIFONE CONFIDENTIAL
DRAFT
TERMINAL SETUP
Establishing Communication
VX 520 GPRS CTLS I
NSTALLATION GUIDE 19
Establishing
Communication
You can connect the VX 520 GPRS CTLS using three options: By telephone line,
by ethernet and via GPRS.
Connecting by
Telephone Line.
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see Figure 6). This is a direct connection and
the line is dedicated to the terminal.
Figure 6 VX 520 GPRS CTLS Direct Telephone Connection
Connecting by
Ethernet
Connect the ethernet cable to the ETH port on the terminal, then route it directly to
a network wall jack (see Figure 7). This is a direct connection to your network.
Figure 7 VX 520 GPRS CTLS Ethernet Connection
Connecting by
GPRS
Insert the SIM card according to the instructions on Installing or Replacing SIM
Card to get your VX 520 GPRS CTLS connected to the GPRS network provider.
23
RJ-11
WARNING
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
3
%4(
RJ-45