User's Manual
Table Of Contents
- VX 520-G Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Installing or Replacing SIM Card
- Connecting Optional Devices
- Charging the Smart Battery
- Connecting the Terminal Power Pack
- Privacy Shield (Optional)
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- Troubleshooting Guidelines
- VeriFone Service and Support
- Index
- Contact VeriFone
VERIFONE CONFIDENTIAL
DRAFT
TERMINAL SETUP
Connecting Optional Devices
VX 520 GPRS CTLS I
NSTALLATION GUIDE 25
If a cable is not already connected to the smart card reader or PIN pad, insert
the small modular plug on one end of the interface cable into the optional
device’s modular jack.
3 Insert the larger RJ-45-type connector on the other end of the PIN pad cable
into the PIN pad serial port on the terminal. Figure 16 provides an example of
a smart card reader and PIN pad connection to the PIN pad serial port.
Figure 16 VX 520 GPRS CTLS Sample PIN Pad Connection
Connecting ECRs to
the VX 520 GPRS
CTLS
The VX 520 GPRS CTLS terminal also supports electronic cash registers (ECR).
Contact your VeriFone representative or visit the online store at
www.store.verifone.com for information on these devices.
Figure 17 provides an example of a peripheral connection to the USB port.
Figure 17 VX 520 GPRS CTLS Sample ECR Connection
3
%4(
CAUTION
ECRs require a separate power source. Before connecting a check reader or
similar device, remove the power cord from and ensure that the indicator LED is
not lit.
3
%4(