User's Manual
Table Of Contents
- VX 520-G Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Installing or Replacing SIM Card
- Connecting Optional Devices
- Charging the Smart Battery
- Connecting the Terminal Power Pack
- Privacy Shield (Optional)
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- Troubleshooting Guidelines
- VeriFone Service and Support
- Index
- Contact VeriFone
VERIFONE CONFIDENTIAL
DRAFT
TERMINAL SETUP
Connecting Optional Devices
26 VX 520-G INSTALLATION GUIDE
External Printers
Supported
Although the VX520-G terminal has an internal thermal printer, it may
be convenient to print larger print runs (for example, daily or weekly reports) to an
external printer. The VX 520-G terminal supports the VeriFone P250,
P350, P900, and P950 external printers. Contact your VeriFone representative or
visit the online store at www.store.verifone.com
for information on these devices.
External printers connect through the RS-232 port and require a separate power
supply.
Installing the Smart
Battery
The smart battery fits in a slot on the back of the VX520-G
terminal.
The locking tab clicks when the battery is in place. The slot is keyed, so that there
is only one way to insert the battery.
Figure 18 Installing the Smart Battery
Smart Battery Removal
To remove the VX520-G smart batt
ery, press the locking tab and pull
the smart batt
ery from its slot.
Figure 19 Removing the Smart Battery