User's Manual

VERIFONE CONFIDENTIAL
DRAFT
TERMINAL SETUP
Privacy Shield (Optional)
VX 520-G I
NSTALLATION GUIDE 29
Privacy Shield
(Optional)
The privacy shield protects the customers’ PIN entry from being seen by the
cashier or other customers. The illustration (Figure 21) shows an example of a
VX520-G
with the optional privacy shield.
Figure 21 Optional Privacy Shield
Using the CTLS
Reader
The VX520-G function only gets activated when an application signals
the start of a contactless smart card transaction.
To perform a
contactless smart
card transaction:
1 Gently tap the card onto or hold the card (within 4 cm) against the surface of
the RFID canopy (see Figure 22).
2 An activated LED visual on top of the terminal display accompanied by a
short beeping sound indicates a successful transaction.
Figure 22 Using a CTLS Card
NOTE
Merchants who install the terminal without the privacy shield must ensure the
cardholder’s privacy when entering his PIN by positioning the terminal away from
open view.
NOTE
Make sure you prevent the contactless module from coming into contact with
metallic surfaces while in use. Taking care of the module ensures proper function
throughout the operating life of your VX520-G.