User's Manual
Table Of Contents
- VX 520-G Installation Guide
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing/ Replacing MSAM Cards
- Installing or Replacing SIM Card
- Connecting Optional Devices
- Charging the Smart Battery
- Connecting the Terminal Power Pack
- Privacy Shield (Optional)
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- Troubleshooting Guidelines
- VeriFone Service and Support
- Index
- Contact VeriFone
VERIFONE CONFIDENTIAL
DRAFT
VX 520-G INSTALLATION GUIDE 31
CHAPTER 3
Specifications
This chapter discusses power requirements, dimensions, and other specifications
of the VX520-G terminal:
Power
VX520-G terminal:
37.2W
: 9.3V DC; 4.0 A
DC Power Pack
UL, ITE listed, LPS power supply:
a Input rated: 100 - 240V AC, 50/60 Hz
b Output rated:
37.2W
: 9.3V DC; 4.0 A
Barrel co
nnector polarity:
Temperature
• Operating temperature: 0
°
to 40
°
C (32
°
to 104
°
F)
• Storage temperature: -30
°
to + 60
°
C (-22
°
to 140
°
F)
• Relative humidity: 5% to 85%; no condensation
External
Dimensions
• Length: 203 mm (7.9 in)
• Width: 87 mm (3.4 in)
NOTE
The VX 520 uses an 18-watt wall-mount power supply as a standard power
source. An optional 37.2-watt power supply may also be used for all other variants
of the VX 520. The VX520-G requires t
he 37.2-watt power supply.
+
–