User's Manual

TERMINAL SETUP
Connecting Optional Devices
VX 520 C
OLOR D/E CTLS INSTALLATION GUIDE 23
V
E
R
I
F
O
N
E
C
O
N
F
I
DE
N
T
I
A
L
TE
M
P
L
ATE
R
EV
F
6 Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 12 Installing an MSAM Card in a VX 520 Color D/E CTLS Terminal
7 Close the MSAM cardholder panel, and then replace the terminal rear cover.
Connecting
Optional
Devices
The VX 520 Color D/E CTLS terminal supports some peripheral devices designed
for use with electronic point-of-sale terminals.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
Optional Device
Connections
The VX 520 Color D/E CTLS terminal has a port that can operate either as a PIN
pad port or an RS-232 port, depending on the power source available.
NOTE
Before inserting the MSAM card, position it as shown in Figure 12, with the card’s
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
CAUTION
Before connecting any peripheral device, remove the power cord from the
terminal. Reconnect the power cord only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and
use, refer to the user documentation supplied with those devices.