User's Manual
Table Of Contents
- VX 600 for the iPhone 3G/3Gs
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing/ Removing an iPhone into the VX 600
- Installing/ Replacing MSAM Cards
- Manual Startup and Shutdown
- Connecting the VX 600 to a Power Source
- Connecting the iPhone to a Host Computer via Micro-USB
- Battery Behavior (No Power Cable)
- Conducting Wireless Transactions
- Using a Smart Card to Conduct Transactions (Optional)
- Using the Magnetic Stripe Reader
- Using the CTLS Reader (Optional)
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
DEVICE SETUP
Selecting a Location
12 VX 600 FOR THE IPHONE 3G/3GS INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
5
Selecting a
Location
Use the following guidelines when selecting a location for your VX 600.
To select a location
•
Select a location convenient for both merchant and cardholder.
• Select a location that is far from heavy metal objects.
• Select a location near a power outlet.
Environmental
Factors
• Select a flat support surface, such as a countertop or table, to keep the device
safe in between uses.
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat,
such as a stove or motor.
• Do not use the device outdoors.
Personal Security
Considerations
The VX 600 is a handover device and personal security is significantly impacted
by the carholder entering the PIN.
• Hand the VX 600 directly to the cardholder for them to enter their PIN.
• Encourage the cardholder to hold the VX 600 close to avoid allowing others to
see the information entered.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the device near water or in moist conditions.
WARNING
For safety, do not string cables or cords across a walkway.
CAUTION
The device is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.