User's Manual
Table Of Contents
- VX 600 for the iPhone 3G/3Gs
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing/ Removing an iPhone into the VX 600
- Installing/ Replacing MSAM Cards
- Manual Startup and Shutdown
- Connecting the VX 600 to a Power Source
- Connecting the iPhone to a Host Computer via Micro-USB
- Battery Behavior (No Power Cable)
- Conducting Wireless Transactions
- Using a Smart Card to Conduct Transactions (Optional)
- Using the Magnetic Stripe Reader
- Using the CTLS Reader (Optional)
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
DEVICE SETUP
Unpacking the Shipping Carton
VX 600 FOR THE IPHONE 3G/3GS INSTALLATION GUIDE 13
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
5
Unpacking the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The VX 600 is a secure product and any tampering may
cause the device to cease to function properly.
To unpack the
Shipping Carton
1 Remove and inspect the following items:
• VX 600 unit
• USB to Micro-USB cord
2 Remove all plastic wrapping from the unit and other components.
3 Remove the clear protective film from the unit.
4 Save the shipping carton and packing material for future repacking or moving
the device.
Examining
Device Features
Before you continue the installation process, notice the features of the VX 600
(see Figure 2 and Figure 3).
CAUTION
Do not use a unit that has been damaged or tampered with. The VX 600 comes
equipped with tamper-evident labels. If a label or component appears damaged
or if the device appears to have been opened, please notify the shipping
company and your VeriFone representative or service provider immediately.
NOTE
You will need to have an iPhone installed to proceed. For more information, see
Installing/Removing an iPhone into the VX 600.