User's Manual
Table Of Contents
- VX 600 for the iPhone 3G/3Gs
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing/ Removing an iPhone into the VX 600
- Installing/ Replacing MSAM Cards
- Manual Startup and Shutdown
- Connecting the VX 600 to a Power Source
- Connecting the iPhone to a Host Computer via Micro-USB
- Battery Behavior (No Power Cable)
- Conducting Wireless Transactions
- Using a Smart Card to Conduct Transactions (Optional)
- Using the Magnetic Stripe Reader
- Using the CTLS Reader (Optional)
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
VX 600 FOR THE IPHONE 3G/3GS INSTALLATION GUIDE 29
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
5
CHAPTER 6
Troubleshooting
Guidelines
The troubleshooting guidelines provided in the following section are included to
help you install and configure your VX 600 successfully. Typical examples of
malfunction you may encounter while operating your VX 600 and steps you can
take to resolve them are listed in this chapter.
If the problem persists even after performing the outlined guidelines or if the
problem is not described below, contact your local VeriFone representative for
assistance.
Device Does Not
Start
• Ensure that the battery charge state is not below the critically low level.
• Recharge the battery.
Device Display
Does not Show
Correct/
Readable Info
• Recharge the battery.
• Connect the VX 600 into a known-good power supply (if available) to see if
this clears the problem.
• If the problem persists, contact your local VeriFone representative for
assistance.
NOTE
The VX 600 comes equipped with tamper-evident labels. The VX 600 unit
contains no user serviceable parts. Do not, under any circumstance, attempt to
disassemble the device. Perform only those adjustments or repairs specified in
this guide. For all other services, contact your local VeriFone service provider.
Service conducted by parties other than authorized VeriFone representatives may
void any warranty.
CAUTION
Use only a VeriFone-supplied power pack. Using an incorrectly rated power
supply may damage the device or cause it not to work as specified. Before
troubleshooting, ensure that the power supply being used to power the device
matches the requirements specified on the bottom of the device. (See
Specifications, for detailed power supply specifications.) Obtain the appropriately
rated power supply before continuing with troubleshooting.