User's Manual

SETUP
Installing/Replacing the Paper Roll
14 VX 600 BLUETOOTH PRINTER INSTALLATION GUIDE
V
E
R
I
F
O N
E
C
O
N F
I
D E N T
IA
L
T
E
M
P
L
A
T
E
R
E
V
F
Installing/
Replacing the
Paper Roll
Before you can process transactions that require a receipt or record, you must
install paper in the printer.
The VX 600 Bluetooth Printer uses a roll of single-ply, thermal sensitive paper 47
mm (2.2
4 inches) wide by 25 meter long paper. A pink out-of-paper indicator line
appears on the edge of the paper approximately 18 inches before the end of the
roll. When this line appears, there is only enough paper remaining on the roll to
complete at least one transaction.
To install/replace a
paper roll
1 Hook your finger under the latch and lift up to swing the paper roll cover open.
Figure 6 Opening the printer cover
2 Remove any partial roll of paper in the printer tray by lifting it up.
3 Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4 Hold the roll so the paper feeds from the bottom of the roll.
CAUTION
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality VeriFone paper, refer to
Accessories and Documentation.
Store thermal paper in a cool, dry, dark area. Handle thermal paper carefully:
imp
act, friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll paper with folds, wrinkles, tears, or holes at the edges in the print
area.
1
2