User's Manual
Table Of Contents
- VX 600 Bluetooth Agnostic
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing or Replacing MSAM Cards
- Installing the Battery
- Manual Startup and Shutdown
- VX 600 Bluetooth Agnostic Device Connections
- Using the Smart Card Reader
- Using the Magnetic Stripe Reader
- Using the CTLS Reader
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
DEVICE SETUP
Installing the Battery
VX 600 B
LUETOOTH AGNOSTIC INSTALLATION GUIDE 15
Installing the
Battery
You will need to install a Lithium-ion polymer battery pack to operate the VX 600
Bluetooth Agnostic.
To install the battery 1 Place the VX 600 Bluetooth Agnostic face down on a soft, clean surface to
protect the lens from scratches. Loosen the screw from the compartment door.
Slide out and lift the compartment door.
Figure 6 Removing screw and opening compartment door
2 Position the battery so that the gold contacts match up with those on the
phone and then lower down the other end of the battery.
Figure 7 Battery insertion
3 Close the VX 600 Bluetooth Agnostic compartment door and tighten the
locking screw.
Figure 8 Closing compartment door