User's Manual
Table Of Contents
- VX 600 Bluetooth Agnostic
- Contents
- Preface
- Device Overview
- Device Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Device Features
- Installing or Replacing MSAM Cards
- Installing the Battery
- Manual Startup and Shutdown
- VX 600 Bluetooth Agnostic Device Connections
- Using the Smart Card Reader
- Using the Magnetic Stripe Reader
- Using the CTLS Reader
- Using the Barcode Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
DEVICE SETUP
Using the Smart Card Reader
18 VX 600 BLUETOOTH AGNOSTIC INSTALLATION GUIDE
4 Reconnect power to the host computer.
Figure 10 Connecting VX 600 Bluetooth Agnostic to a host computer
Connecting to
another Bluetooth
Device
Different devices have different pairing procedures. For more information, refer to
the documentation that comes with your Bluetooth device. To make the VX 600
Bluetooth Agnostic searchable, the device must be turned on.
The device name for the VX 600 Bluetooth Agnostic is either “VFI-BTPWMR” or
“VFI-MFiBTPWMR”, depending on the Bluetooth device the VX 600 Bluetooth
Agnostic is paired with.
Using the Smart
Card Reader
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
To conduct a smart
card transaction
1 Position the smart card with the contacts facing down.
2 Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
Figure 11 Conducting a smart card transaction