User's Manual
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- Vx670 Bluetooth® Support
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models Only)
- Using the Smart Battery
- Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Placing the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/ Readable Info
- Terminal is Unable to Go Online and Displays Connection Failure (for Bluetooth® variant)
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Examining Connection Ports
20 V
X
670 INSTALLATION GUIDE
Multiport Adapter
A multiport adapter (VPN 24799-01-R) that provides connectivity for power, USB
Host, USB Device, and COM1 (RS232 UART). This cable is used only for
deployment or development purposes.
Figure 6 Multiport Adapter Connection to a V
x
670 Terminal
USB Modem Dongle
A modem in the form of a USB Modem Dongle may be provided with the V
x
670
terminal. The M267-D10-00 USB Modem Dongle provides communication via a
telephone line at speeds of up to 14,400 bps. It can also be connected to the full-
feature Base Station when the terminal is in the station (see Attaching the USB
Dongles to the Base Station).
USB Serial Dongle
(RS232 UART)
The USB Serial Dongle (VPN M267-D01-00) may be provided with the V
x
670
terminal. It is designed to accommodate the RJ45 connector. The USB Serial
Dongle can also be connected to the full-feature Base Station when the terminal is
placed in the station (see Attaching the USB Dongles to the Base Station).
NOTE
Other cables are available for development purposes. Check with your local
VeriFone representative for further information.
NOTE
A Base Station may be provided with the V
x
670 terminal. A full-feature Base
Station has two USB host ports for external dongles as well as a battery charger
slot for charging an extra lithium-ion battery pack. A standard Base Station does
not have any USB ports and is capable of charging the terminal only and not the
extra battery pack.