User's Manual
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- Vx670 Bluetooth® Support
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models Only)
- Using the Smart Battery
- Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Placing the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/ Readable Info
- Terminal is Unable to Go Online and Displays Connection Failure (for Bluetooth® variant)
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Charging the Spare Battery on the Base Station
V
X
670 INSTALLATION GUIDE 41
1 Insert the USB dongle into the USB port located at the back of the Base
Station.
Figure 29 Inserting External Dongle Into USB Port
2 After inserting the external dongle into the USB port, place the V
x
670 terminal
onto the Base Station (see Powering Up the Base Station).
3 Connect the peripheral to the external dongle.
Charging the
Spare Battery on
the Base Station
The full-feature Base Station can charge the V
x
670 terminal while charging an
extra battery pack.
1 Connect the Base Station to a power source (see Powering Up the Base
Station)
2 Place the spare battery pack onto the Base Station as shown in Figure 30.
Figure 30 Putting Spare Battery Pack Into the Base Station