Installation Guide
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Handy-Link Connector
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models)
- Connecting the Terminal Power Pack
- Using the Smart Battery
- Vx670 Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Charging the Smart Battery
- Using the Vx670 Base Station
- Placing the Vx670 Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/Readable Info
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Peripheral Device Does Not Work
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
V
X
670 INSTALLATION GUIDE 13
CHAPTER 2
Terminal Setup
This chapter describes the terminal setup procedure. You will learn about:
• Selecting Terminal Location.
• Unpacking the Shipping Carton.
• Examining Terminal Features.
• Examining the Handy-Link Connector.
• Establishing Telephone Line Connections.
• Installing the Paper Roll.
• Installing/Replacing MSAM Cards.
• Installing/Replacing SIM Card (GSM/GPRS Models).
• Install the battery (see Figure 16)..
• Connecting the Terminal Power Pack.
• Using the Smart Battery.
• V
x
670 Battery Behavior (No Power Cord).
• Installing the Smart Battery.
• Charging the Smart Battery.
• Using the V
x
670 Base Station.
• Placing the V
x
670 Terminal Onto the Base Station.
• Attaching the USB Dongles to the Base Station.
• Charging the Spare Battery on the Base Station.
• Conducting Wireless Transactions.
• Conducting Smart Card Transactions.
• Using the Magnetic Card Reader.
Selecting
Terminal
Location
Use the following guidelines when selecting a location for your V
x
670 terminal.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.