Installation Guide
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Handy-Link Connector
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models)
- Connecting the Terminal Power Pack
- Using the Smart Battery
- Vx670 Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Charging the Smart Battery
- Using the Vx670 Base Station
- Placing the Vx670 Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/Readable Info
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Peripheral Device Does Not Work
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Examining the Handy-Link Connector
V
X
670 INSTALLATION GUIDE 17
Examining the
Handy-Link
Connector
The Handy-Link connector is a cell phone style connector that supports a wide
variety of communication ports via cable adapters.
Figure 3 The V
x
670 Handy-Link Connector
Cable Adapters
The cable adapters enable the V
x
670 terminal to connect to .....
(need content and images of cable adapters for this section, or are these the
same as the ports shown above?)
Connection Ports
The V
x
670 terminal has one primary port that uses the Handy-Link connector to
support the following peripherals through the use of cable adapters:
Serial Port (COM 1)
A 4-Wire RS232 port with TX, RX, RTS, and CTS signals. This port will provide for
“back-to-back” download capability.
USB HOST
SERIAL PORT (COM 1)
USB DEVICE
CELL PHONE STYLE
CONNECTOR