Installation Guide
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Handy-Link Connector
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models)
- Connecting the Terminal Power Pack
- Using the Smart Battery
- Vx670 Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Charging the Smart Battery
- Using the Vx670 Base Station
- Placing the Vx670 Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/Readable Info
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Peripheral Device Does Not Work
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Examining the Handy-Link Connector
18 V
X
670 INSTALLATION GUIDE
USB Host
A 2-Wire USB Host port for external peripherals. A connector adaptor provides for
standard USB host connection.
USB Device
A 2-Wire USB device port connected directly to the PC’s USB ports. This port is
mainly for debugging purposes.
Turn the terminal upside down to view the V
x
670 terminal’s primary port. Figure 4
shows the primary port for the V
x
670 terminal.
Figure 4 The V
x
670 Primary Port (Bottom View)
For information on how to attach peripheral devices, see Install the battery (see
Figure 16)..
USB Connection
Aside from the Handy-Link connector that connects to the primary port, the V
x
670
unit has a USB port that supports a modem or an RJ45 connector.
(need more info and new images for this section; is this the same as the USB port
attached to the Handy-Link cable?)
NOTE
A Base Station may be provided with the V
x
670 terminal. A full-feature Base
Station has two USB host ports for external dongles as well as a battery charger
slot for charging an extra lithium-ion battery pack. A standard Base Station does
not have any USB ports and is capable of charging the terminal only and not the
extra battery pack.
WARNING
Do not connect the terminal to the power supply until all the peripherals are
attached.