Installation Guide
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Handy-Link Connector
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models)
- Connecting the Terminal Power Pack
- Using the Smart Battery
- Vx670 Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Charging the Smart Battery
- Using the Vx670 Base Station
- Placing the Vx670 Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/Readable Info
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Peripheral Device Does Not Work
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Establishing Telephone Line Connections
V
X
670 INSTALLATION GUIDE 19
USB Dongle – Modem
A modem in the form of a USB dongle is provided with the V
x
670 terminal. The
USB Dongle – Modem provides communication via a telephone line at speeds of
up to 14,400 bps. The USB Dongle – Modem can also be connected to the full-
feature Base Station when the terminal is in the station.
USB Dongle – Serial
The USB Dongle – Serial provides the V
x
670 terminal with a serial communication
port for backward compatibility. It is designed to accommodate the RJ45
connector. The USB Dongle - Serial can also be connected to the full-feature
Base Station when the terminal is placed in the station.
Establishing
Telephone Line
Connections
Connect the USB Dongle – Modem to the USB port of the Handy-Link connector,
which is connected to the V
x
670 terminal. Connect the telephone cord to the
modem, then route the other end directly to a telephone wall jack (see Figure 5).
Figure 5 V
x
670 Telephone Connection Via Modem
USB DONGLE - MODEM
USB PORT
HANDY-LINK CONNECTOR
WARNING
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.