User's Manual
Table Of Contents
- VX 675
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Port
- 3G Support
- WiFi Bluetooth Support
- Installing the Paper Roll
- Installing the SIM Card
- Installing and Replacing SD Card
- Using the Battery
- Battery Behavior (No Power Pack)
- Connecting the Terminal Power Pack
- Charging the Battery
- VX 675 Base Stations
- Powering Up the Base
- Docking the Terminal on the Base
- Undocking the Terminal from the Base
- Connecting to USB Host
- Conducting a Bluetooth Transaction
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- ECR (Fiscal Module) Support
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Contact VeriFone
TERMINAL SETUP
Installing the SIM Card
20 VX 675 INSTALLATION GUIDE
Installing the
SIM Card
VX 675 supports GSM SIM (Subscriber Identity Module).
To install or replace
the card
1 Turn off the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
3 Unscrew and remove the back compartment cover.
4 Lift the battery pack.
Figure 8 Removing the Back Compartment Cover
5 Insert the SIM card into the cardholder as shown below.
Figure 9 Inserting the SIM Card
6 Return the battery pack to its original position.
7 Close and screw the back compartment cover.
B
A
NOTE
Ensure that the card’s gold contacts are facing the compartment. The cardholder
connector base has a set of contacts and a notch to ensure the SIM card is
positioned correctly. The SIM card has a notch on one corner to ensure that it fits
into the connector base in only one way.
DC
MI
S
M
IS
A
B