User's Manual

VERIX TERMINAL MANAGER
Verix Terminal Manager Menus
VX 675 R
EFERENCE GUIDE 43
Table 4 Enter Verix Terminal Manager
Display Action
VERIFONE VX675
QT65010M
03/09/2012 Verix
COPYRIGHT 1997-2012
VERIFONE
ALL RIGHTS RESERVED
At startup, the terminal displays a copyright notice
screen that shows the terminal model number, the
OS version of the VX 675 stored in the terminal’s
memory, the date the firmware was loaded into
the terminal, and the copyright notice.
This screen appears for three seconds, during
which time you can enter Verix Terminal Manager
by simultaneously pressing
ENTER and 7 key.
You can extend the display period of this screen
by pressing any key during the initial three
seconds. Each keypress extends the display
period an additional three seconds.
If the battery has not been initially charged, the
screen displays
BATTERY NOT CALIBRATED to
inform the user to initialize and condition the
battery.
For more information about the battery, refer to
VX 675 Battery Information.
BATTERY 100%
FOR STATUS PRESS KEY 3
VERIFONE VX675
QT65010M
03/09/2012 Verix
* * T A M P E R * *
COPYRIGHT 1997-2012
VERIFONE
ALL RIGHTS RESERVED
If an attempt to break into the terminal’s system
has been made, the message
**TAMPER** is
displayed in place of the certificate. The terminal
will remain in this state until the condition has
been remedied.
<application prompt>
If an application already resides on the terminal,
an application-specific prompt is displayed.
Otherwise, an error message is displayed. For
more information on startup errors, see STARTUP
ERRORS.