User's Manual
Table Of Contents
- VX 675
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Port
- 3G Support
- WiFi Bluetooth Support
- Installing the Paper Roll
- Installing the SIM Card
- Installing and Replacing SD Card
- Using the Battery
- Battery Behavior (No Power Pack)
- Connecting the Terminal Power Pack
- Charging the Battery
- VX 675 Base Stations
- Powering Up the Base
- Docking the Terminal on the Base
- Undocking the Terminal from the Base
- Connecting to USB Host
- Conducting a Bluetooth Transaction
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- ECR (Fiscal Module) Support
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Contact VeriFone
TERMINAL SETUP
Connecting to USB Host
28 VX 675 INSTALLATION GUIDE
Connecting to
USB Host
USB Host lets you download applications and secure keys via USB flash drive.
To connect to the
USB Host
1 Power up the base. Insert the micro-USB plug into the micro-USB port of the
base and plug the AC power pack into a wall outlet or power surge protector.
2 Make sure that the terminal is docked on the base.
3 Insert the USB flash drive into the USB port on the left side of the base.
Figure 19 Connecting USB Flash Drive to the USB Host
Conducting a
Bluetooth
Transaction
VX 675 BT Base relays wireless data received from the terminal via modem and
then transmits back the response to the terminal. It pairs with the Bluetooth Base
to go online for authorization. These are both Class 1 Bluetooth devices providing
secure radio communication.
Figure 20 VX 675 WiFi-BT Terminal Communicating with the Bluetooth
Base
To improve the range performance of the terminal, place the Bluetooth Base in a
location that services all of the card payment areas in the premises. Ideally, place
it within line of sight of all areas of card acceptance.
ETH