User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Attaching the USB Dongles to the Base Station
44 VX 680 INSTALLATION GUIDE
Attaching the
USB Dongles to
the Base Station
With the VX 680 mounted on the Base Station, use the USB dongles to connect to
external peripherals. Only one Modem Dongle and one Serial Dongle can be
connected to the Base Station. A second Modem Dongle or a second Serial
Dongle will be ignored by the terminal.
1 Insert the USB dongle into the USB port located at the back of the Base
Station.
Figure 32 Inserting External Dongle Into USB Port
2 After inserting the external dongle into the USB port, place the VX 680
terminal onto the Base Station (see Powering Up the Base Station).
3 Connect the peripheral to the external dongle.
Charging the
Spare Battery on
the Base Station
The full-featured Base Station can charge the VX 680 terminal while charging an
extra battery pack.
1 Connect the Base Station to a power source (see Powering Up the Base
Station)
NOTE
The full-featured Base Station has USB ports for two external dongles. The
standard Base Station does not have USB ports.