User's Manual

TERMINAL SETUP
Unpacking the Shipping Carton
16 V
X
680 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
3
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or motor.
• Do not use the terminal outdoors.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
• Do not use the terminal near water or in moist conditions.
Considerations for
Bluetooth® Comm
Base Station
The Bluetooth
®
Comm Base Station requires the following:
• A power source within two meters.
• A telephone socket within three meters (for PSTN version).
• A location with minimal obstruction for communicating with terminals.
• It is recommended that the Bluetooth
®
Comm Base Station be installed two
meters from the ground to allow the LEDs to be seen, and the state of the
connection to be confirmed.
Unpacking the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The V
x
680 device is a secure product and any tampering
may cause the terminal to cease to function properly.
To unpack the
Shipping Carton
1 Remove and inspect the following items:
• Terminal
• Power pack
• Telephone line cable
• Power cable
• Battery pack
• Paper roll
2 Remove all plastic wrapping from the terminal and other components.
CAUTION
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.