User's Manual
Table Of Contents
- Vx680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/ GPRS Models Only)
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Placing the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/ Readable Info
- Terminal is Unable to Go Online and Displays Connection Failure (for Bluetooth® variant)
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
TERMINAL SETUP
Examining Connection Ports
20 V
X
680 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
3
Multiport Adapter
An optional multiport adapter (VPN 08643-01-R) provides connectivity for power,
USB Host, USB Device, and COM1 (RS232 UART). This cable is used only for
deployment or development purposes.
Figure 6 Multiport Adapter Connection to a V
x
680 Terminal
USB Modem Dongle
Use the M26-D10-00 USB Modem Dongle to provide the V
x
680 terminal with
modem communication over a telephone line at speeds of up to 33,600 bps. It can
also be connected to the full-feature Base Station when the terminal is in the
station (see Attaching the USB Dongles to the Base Station).
USB Serial Dongle
(RS232 UART)
The USB Serial Dongle (VPN M267-D01-00) may be purchased with the V
x
680
terminal. It is designed to accommodate the RJ45 connector. The USB Serial
Dongle can also be connected to the full-feature Base Station when the terminal is
placed in the station (see Attaching the USB Dongles to the Base Station).
NOTE
Other cables are available for different purposes. Check with your local VeriFone
representative for further information.
NOTE
A Base Station may be purchased with the V
x
680 terminal or purchased as a
separate option full-feature Base Station has two USB host ports for external
dongles as well as a battery charger slot for charging an extra lithium-ion battery
pack. A standard Base Station does not have any USB ports and is capable of
charging the terminal only and not the extra battery pack.