User's Manual

TERMINAL SETUP
Battery Behavior (No Power Cable)
V
X
680 INSTALLATION GUIDE 33
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
3
Battery Behavior
(No Power
Cable)
If you connect the V
x
680 to a non-battery power source, the terminal shifts to
cabled power mode and starts up automatically, regardless of the battery charge
state.
Manual Startup
Hold the green key down for about 4 seconds until the terminal displays the
startup screen.
When the terminal has power, the terminal lights are activated and the green LED
indicator remains lit.
Manual Shutdown
Hold the red key down for about 4 seconds until the terminal displays the
shutdown verification screen. Keep holding the red key until the V
x
680 terminal
shuts down.
NOTE
The 4-second power-up delay is for preventing terminal startup if the green key is
accidentally held down. The time required to hold the green key down to power up
the terminal is configurable (for more information, see the V
x
680 Reference
Manual – VPN
DOC268-004-EN-A).
NOTE
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
DOWNLOAD NEEDED appears on screen after the initial
VeriFone copyright screen.
NOTE
• The 4-second shutdown delay is for preventing terminal shutdown if the red
key is accidentally held down. The time required to hold the red key down to
shut down the terminal is configurable (for more information, see the V
x
680
Reference Manual – VPN
DOC268-004-EN-A).
• When the terminal has no power, the screen is blank and the green LED
indicator is not lit.