User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS, CDMA, and 3G Models)
- Installing and Replacing SD Card
- VX 680 Bluetooth Support
- VX 680 3G and GPS Support
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Using the Base Station
40 VX 680 INSTALLATION GUIDE
Bluetooth Access
Point Charging Base
The Bluetooth Access Point Charging Base allows the VX 680 WiFi and
Bluetooth-enabled terminal to connect wirelessly to the network. It has three LED
indicators: power indicator, Bluetooth traffic and modem traffic.
Figure 32 The VX 680 Bluetooth Access Point Charging Base Station
(
NOTE
If the devices are unable to find each other after two minutes, press the Bluetooth
switch (blue button) found on the back of the VX 680 AP Charging Base. This
switch is located between the power and Ethernet sockets. After pressing the
switch, the two LED's will blink (blue) indicating that the VX 680 AP Charging Base
is discoverable.
CAUTION
Pressing the Bluetooth switch while there is an existing Bluetooth connection may
result in loss of connection, loss of modem profile, and loss of all modem settings/
configuration.