User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Examining Connection Ports
VX 680 I
NSTALLATION GUIDE 21
Multi-port Adapter
An optional multi-port adapter (VPN 08643-01-R) provides connectivity for power,
USB host, USB device, and COM1 (RS-232 UART). This cable is used only for
deployment or development purposes.
Figure 6 Multi-port Adapter Connection to a VX 680 Terminal
USB Modem Dongle
Use the USB Modem Dongle (VPN 24123-04-R) to provide the VX 680 terminal
with modem communication over a telephone line at speeds of up to 33,600 bps.
It can also be connected to the full-featured Base Station (see Attaching the USB
Dongles to the Base Station).
&20
9'&
0,1,86%$
NOTE
Other cables are available for different purposes. Check with your local VeriFone
representative for further information.
NOTE
The VX 680 WiFi/BT variant does not support the USB modem dongle
connection.