User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Examining Connection Ports
22 VX 680 INSTALLATION GUIDE
USB Serial Dongle
(RS-232 UART)
The USB Serial Dongle (VPN 24122-04-R) is designed to accomodate the RJ45
connector and it may be purchased with the VX 680 terminal. The USB Serial
Dongle can also be connected to the full-featured Base Station (see Attaching the
USB Dongles to the Base Station).
Bluetooth
®
Access
Point (AP) Charging
Base (Bluetooth
®
Interface)
The Bluetooth
®
AP Base Station relays wireless data received from the VX 680
terminal via modem and then transmits back the response to the terminal.
Figure 7 VX 680 Terminal communicating with a Bluetooth
®
Access
Point (AP) Charging Base
To improve the range performance of the VX 680 terminal, the Bluetooth AP Base
Station should be placed in a position that will service all of the card payment
areas in your premises. The ideal placement is to position the base station within
line of sight of all areas of card acceptance.
NOTE
A Base Station may be purchased with the VX 680 terminal or purchased as a
separate option. The full-featured Base Station has two USB host ports for
external dongles as well as a battery charger slot for charging an extra Li-ion
battery pack. A standard Base Station does not have any USB ports and is
capable of charging the terminal only and not the extra battery pack.
CAUTION
The Modem Dongle and Serial Dongle are intended for use with the VX 680
terminal and Base Station only. They should not be installed or used with any
equipment other than the VX 680 terminal or Base Station.
100 meters
(