User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
VX 680 Bluetooth
®
Support
VX 680 INSTALLATION GUIDE 27
Power Connection
to the Bluetooth
®
AP Charging Base
Station
The Bluetooth
®
AP Charging Base Station comes with a universal-input power
pack capable of operating from voltages of 100V-240V AC.
To Connect the Power
Pack
1 Insert the round barrel connector into the power port on the Bluetooth
®
AP
Charging Base Station, as shown in Figure 11.
Figure 11 Power Connection to the Bluetooth
®
AP Charging Base
Station
2 Insert the AC power cord into the power pack.
3 Plug the AC power cord into a wall outlet or powered surge protector.
4 Confirm that the Base Station is powered up as indicated by the solid green
LED.
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
NOTE
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.