User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Installing and Replacing MSAM Cards
VX 680 I
NSTALLATION GUIDE 31
Installing and
Replacing MSAM
Cards
When you first receive your VX 680 terminal, you may need to install an MSAM
card or you may need to replace old cards.
To Install and Replace
MSAM
1 Power off the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
3 Unlock the printer cover.
Figure 16 Unlocking the Printer Cover
4 Unscrew the latch to expose the MSAM compartment. (see Figure 17)
Figure 17 Exposing the MSAM Compartment
5 Remove any previously installed MSAM card by pushing the snap that keeps
the SAM in place.
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.