User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
TERMINAL SETUP
Examining Connection Ports
20 VX 680 INSTALLATION GUIDE
Power Adapter
Cable
Each VX 680 terminal comes with power adapter cable (VPN CBL268-004-01-A)
that completes the connection between the power pack and the terminal.
Figure 4 Power Adapter Cable Connection to a VX 680 Terminal
USB Host Cable
The VX 680 terminal also provides a 2 wire USB host port (VPN CBL268-003-01-
A) for supporting external peripherals. A connector adaptor provides for standard
USB host connection for the Modem Dongle or the RS-232 UART dongle.
Figure 5 USB Host Cable Connection to a VX 680 Terminal