User's Manual
Table Of Contents
- VX 680
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining Connection Ports
- Establishing Telephone Line Connections
- VX 680 Bluetooth® Support
- Installing the Paper Roll
- Installing and Replacing MSAM Cards
- Installing the SIM or R-UIM Card (GPRS and CDMA Models)
- Installing and Replacing SD Card
- Using the Smart Battery
- Battery Behavior (No Power Cable)
- Installing the Smart Battery
- Removing the Smart Battery
- Connecting the Terminal Power Pack
- Charging the Smart Battery
- Using the Base Station
- Powering Up the Base Station
- Mounting the Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Conducting Bluetooth® Transactions
- Using the Magnetic Card Reader
- Using the Stylus
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Index
- Contact VeriFone
VX 680 INSTALLATION GUIDE 49
CHAPTER 3
Specifications
This chapter discusses power requirements, dimensions, and other specifications
of the VX 680 terminal.
Power
12V DC 2.0 A
DC Power Pack
UL, ITE listed, LPS power supply:
a Input rated: 100-240V AC, 50/60 Hz
b Output rated: 12V DC 2.0 A
Barrel connector polarity:
Temperature
• Operating temperature: 0
to 50
C (32
to 122
F)
• Relative humidity: 5% to 90%; non-condensing
External
Dimensions
• Length: 171.5 mm (6.8 in)
• Width: 86 mm (3.4 in)
• Depth: 63 mm (2.5 in)
n