User's Manual
Table Of Contents
- VX 685/VX 690
- Contents
- Preface
- Terminal Overview
- Setup
- Terminal Location
- Inside the Shipping Carton
- Terminal Features
- Connection Port
- Paper Roll
- SIM Card
- MSAM Card
- Micro SD Card
- Optional Devices
- Battery Features
- Terminal Power Source
- Base Stations
- 3G, GPRS, and GPS Support
- VX 690 BT/Wi-Fi Support
- Smart Card Reader
- Magnetic Card Reader
- Contactless Smart Card Transaction
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Battery Information
- Contact Verifone
SETUP
SIM Card
VX 685/VX 690 I
NSTALLATION GUIDE 17
6 Drop the paper roll into the printer tray.
Figure 4 Installing Paper Roll Cover
SIM Card
VX 685 has a single SIM slot that enables communication to the network provider.
VX 690 supports dual SIM. SIM slot 1 is preferred for single SIM use. When dual
SIM is employed, it is ideal to use SIM cards from two different network providers.
This allows the terminal to switch SIMs when it detects poor signal or no network.
Installing or
Replacing a SIM Card
To install or replace a SIM card:
1 Turn off the terminal.
2 Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
3 Lift the battery pack to expose the SIM slots.
CAUTION
Gently press down on the paper roll cover to close it to prevent damaging the
print roller.
NOTE
Position the card’s gold contacts facing away from you, toward the unit. The card
slot in the terminal has a set of contacts. The SIM card has a notch on one corner
to ensure that it fits into the connector base in only one way.