User's Manual
Table Of Contents
- VX 685/VX 690
- Contents
- Preface
- Terminal Overview
- Setup
- Terminal Location
- Inside the Shipping Carton
- Terminal Features
- Connection Port
- Paper Roll
- SIM Card
- MSAM Card
- Micro SD Card
- Optional Devices
- Battery Features
- Terminal Power Source
- Base Stations
- 3G, GPRS, and GPS Support
- VX 690 BT/Wi-Fi Support
- Smart Card Reader
- Magnetic Card Reader
- Contactless Smart Card Transaction
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Battery Information
- Contact Verifone
SETUP
MSAM Card
18 VX 685/VX 690 INSTALLATION GUIDE
4 Align the card to match the embossed number and carefully slide it into the
slots until fully inserted.
Figure 5 SIM Card Insertion
To replace SIM card, gently slide out the old SIM card before inserting a new
SIM.
MSAM Card
You may need to install one or two multiple security access module (MSAM) cards
or replace an old one.
Installing or
Replacing MSAM
Card
To install or replace MSAM cards:
1 Power off the terminal.
2 Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
3 Remove the back cover of the unit.
2
1
CAUTION
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharge can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.