User's Manual
Table Of Contents
- VX 685/VX 690
- Contents
- Preface
- Terminal Overview
- Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Connection Port
- Installing/ Replacing Paper Roll
- Installing/ Replacing SIM Card
- Installing/ Replacing MSAM Cards
- Installing/ Replacing the Micro SD Card
- Connecting Optional Devices
- Battery Features
- Connecting the Terminal to Power Source
- Base Stations
- Powering Up the Base
- 3G, GPRS, and GPS Support
- Bluetooth Support
- Performing a Wireless Transaction
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Performing a Contactless Smart Card Transaction
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Contact VeriFone
SETUP
Installing/Replacing MSAM Cards
18 VX 685/VX 690 INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
3
4 Align the card to match the embossed number and carefully sliding it into the
slots until fully inserted.
Figure 5 SIM Card Insertion
To replace, gently slide out the old SIM card before inserting a new SIM.
Installing/
Replacing MSAM
Cards
You may need to install one or more multiple security access module (MSAM)
cards or replace an old one.
To Install/Replace
MSAM Cards
1 Power off the terminal.
2 Place the terminal face down on a soft, clean surface to protect the lens from
scratches.
3 Remove the back cover of the unit.
CAUTION
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharge can damage the equipment. VeriFone recommends using
a grounded anti-static wrist strap.