Specifications

8. The Ernex Programs
Moneris Vx810 Duet Operating Manual v1.1.01 95
4b.To print only totals in the report, select No.
The terminal prints the Batch Summary Report, communicates with the Ernex Host then returns to the
Reports menu.
5. Press the CANC ANNUL key to return to the GIFT & LOYALTY transactions menu.
8.6.2. Initialization to the Ernex Host
This function sends information about the terminal to the Ernex Host and receives additional parameters
and information from the Host. If you are setting up your terminal for the first time, follow the “First
Initialization” instructions below.
If changes have been made to your Ernex configuration or your Ernex account, the terminal may display
"Initialization Required" or the Merchant Service Centre may call and ask you to re-initialize your
terminal. Follow the “Re-Initialization” instructions below.
First Initialization
This function MUST be performed once after completing configuration in order to use your terminal to
process gift card or loyalty card transactions.
To perform the first Ernex initialization on your terminal:
1. On the applications menu, select GIFT & LOYALTY.
The message "Activating App..." is displayed then the transactions menu appears.
2. Select Setup.
The "Password:" prompt appears.
3. Key in the manager password and press OK.
4. On the Setup menu, select Initialization.
The "Ernex Term ID" prompt appears.
5. Key in the Ernex Terminal ID and press OK.
The terminal completes the initialization and returns to the Setup menu.
6. Press CANC ANNUL to return to the GIFT & LOYALTY transactions menu.
Re-Initialization
If changes have been made to your Ernex configuration or your Ernex account, the terminal may display
'Initialization Required' or the Merchant Service Centre may call and ask you to re-initialize your
terminal.
To re-initialize your terminal:
1. On the applications menu, select GIFT & LOYALTY.
The message "Activating App..." is displayed then the transactions menu appears.
2. Select Setup.
The "Password:" prompt appears.
3. Key in the manager password and press OK.
4. Select Initialization.
5. If the "Batch Not Empty Close Batch?" prompt appears:
Select Yes to close the Ernex batch.
OR
Select No to leave the Ernex batch open.
The "Ernex Term ID" prompt appears.