Specifications

8. The Ernex Programs
Moneris Vx810 Duet Operating Manual v1.1.01 99
8.8. Ernex Configuration
8.8.1. Ernex Printer and Receipt Parameters
Use the Printer selection on the Ernex Setup menu to configure Ernex printer and receipt parameters.
Transactions menu (GIFT & LOYALTY) > Setup menu > Printer
Prmpt Beep Delay
Number of seconds to wait after beeping and displaying the "Tear Receipt; Press OK key" message
before printing the customer receipt.
Key in number of seconds and press OK (120 = default).
Pre-print
Sets the terminal to begin printing the receipt header before the transaction is complete.
Off
On = Default
Enable Printer
Turns the printer on or off.
On = Default
Off (results in the "Printer Disabled" message any time a report should be printed or the "Printer Error"
message any time a financial transaction is attempted)
Number of Copies
Sets the number of receipts printed for each transaction.
0 COPY - no receipts are printed
1 COPY - prints the customer copy
2 COPIES - prints the customer copy and the merchant copy = Default
2 COPIES OPTN - prints the customer copy and prompts for confirmation to print the merchant copy
3 COPIES - prints the customer copy, the merchant copy and a duplicate of the merchant copy
3 COPIES OPTN - prints the customer copy and the merchant copy and prompts for confirmation to
print a duplicate of the merchant copy
8.8.2. Ernex Merchant Parameters
Use the Merchant selection on the Ernex Setup menu to configure Ernex Merchant parameters.
Transactions menu (GIFT & LOYALTY) > Setup menu > Merchant
Merchant ID
Your Moneris Merchant ID.
Key in the numeric Merchant ID assigned to you by Moneris and press OK.