Specifications

2. Features and Procedures
Moneris Vx810 Duet Operating Manual v1.1.01 11
Note: If the Use Def. Clrk? parameter is enabled, the prompt is disabled.
Idle Timeout
Sets the number of seconds of error message display before the terminal returns the card entry prompt.
Key in number of seconds and press OK.
PINPad Type
Configures the PINPad type, if one is connected to the terminal.
Select None for standalone mode (default)
Select SC5000EMV if a PINPad is connected
PABX Code
Sets the value of the PABX prefix that must be dialled to access an outside line.
Key in the prefix (min. 1, max. 4 alphanumeric characters) and press OK.
Note: This value is listed as the "PABX Access Code" on the Terminal Parameters Report
.
Histories Limit
Do Not change this parameter unless directed to do so by Moneris.
Show CB Choices
Enables/disables the display of debit transaction Cashback pre-set amounts on the terminal and, if
applicable, the external PINPad. On the terminal, customers can also select Other to key in an amount of
their choice.
On - pre-set amounts are displayed for selection by the customer (default)
Off - the customer must key in a Cashback amount
Note: The CashBack Option
parameter must be enabled. The desired pre-set amounts are configured via
the Amt 1
, Amt 2 and Amt 3 parameters.
Enable CTLS
Enables/disables use of a modular contactless reader connected to the terminal.
On (default if your Moneris merchant account is configured for contactless reader use)
Off (default if your Moneris merchant account is NOT configured for contactless reader use)
Idle Time Fmt
Sets the time format of the clock displayed on the transactions menu.
24 Hr (e.g. 14:24)
12 Hr (e.g. 02:24pm)
Terminal Beep
Enables/disables key beeping.
On (default)
Off