Specifications

2. Features and Procedures
Moneris Vx810 Duet Operating Manual v1.1.01 13
Footer 1 to 3
The text that appears at the bottom of the receipt. You may also edit the Footer 4 parameter.
Key in alphanumeric text (max. 40 characters) and press OK.
Customer Copy
Determines whether to print a Customer copy of the receipt after the Merchant copy on credit non-EMV
(non-chip) transactions.
None - no customer copy prints
Confirm – “Prt Cust Cpy?” prompts for confirmation to print copy (YES/NO)
Automatic - automatically prints the customer copy (default)
Note: The customer copy is always printed for Debit and EMV (chip) transactions and, when set to
Confirm, the terminal does not prompt. On signatureless transactions, the customer copy may or may not
be printed depending on the card being used and how your terminal is configured
Reprnt Cust Copy
Determines whether a Customer copy of the receipt is printed in addition to the Merchant copy when
reprinting receipts
.
None - only the Merchant copy prints (default)
Confirm - "Prnt Cust Copy?" prompts for confirmation to print the Customer copy (YES/NO)
Automatic (both the Merchant copy and the Customer copy will print)
Note: On signatureless transactions, the Customer copy is always printed instead of the Merchant copy.
Prompt Beep Delay
Number of seconds to wait after beeping and displaying the “Tear Receipt; Press OK key” message
before printing the customer receipt.
Key in the number of seconds and press OK.
Default = 120 seconds.
Enable Printer
Enables/disables the printer.
On (default)
Off
Note: Selecting Off results in the "printer disabled" message any time a report should be printed or
"Printer Error" any time a financial transaction is attempted.
Large Amt Print
Determines whether to print double-wide characters for amount lines, the Sequence number and the
Original Auth #.
On (default)
Off