Specifications

2. Features and Procedures
Moneris Vx810 Duet Operating Manual v1.1.01 15
On
Off (default)
Note: The EnhancedTipProc
parameter must be enabled.
Ask Inv Num?
Enables/disables the Invoice #: prompt.
On
Off (default)
Chip on PreAuth
Enables/disables the use of chip cards for Pre-Authorization transactions. This parameter does not affect
the use of magnetic stripe cards for Pre-Authorization transactions.
On
Off (default)
Note: Many chip cards require a PIN instead of a signature from the cardholder. If a chip and PIN card is
used during a Pre-Authorization, the cardholder MUST be present to enter their PIN during the
transaction. For this reason, some businesses may wish to disable the use of chip cards for Pre-
Authorization transactions. If the Chip on PreAuth parameter is set to Off, the "Swipe Card" prompt
appears instead of the "Swipe or Insert Card" prompt during a Pre-Authorization, and you can swipe the
card even if it is a chip card.
DispEMVPreAuth
Do Not change this parameter unless directed to do so by Moneris.
Use Def. Clrk?
Enables/disables the automatic use of the Default Clerk ID.
On
Off (default)
Note: The Default Clerk
parameter must be configured.
Dial Communications Parameters (Edit CPT Menu)
Use the Edit CPT menu to edit dial communications parameters.
Transactions menu > CONFIGURATION menu (press OK) > Setup menu > Comm > Edit CPT
menu
IMPORTANT: Some parameters cannot be edited unless the terminal batch is empty. If the "Edit
Not Allwd Batch Not Empty" message appears, perform a Batch Close then try editing the
parameter again.
Pri Auth Phone
The Moneris phone number is automatically loaded into this parameter during initialization.
If blank, key in the Moneris authorization phone number and press OK.
Sec Auth Phone
The Moneris phone number is automatically loaded into this parameter during initialization.