Specifications

2. Features and Procedures
24 Moneris Vx810 Duet Operating Manual v1.1.01
To process a transaction with a contactless card, look for the PayPass and payWave
logos. When prompted, the customer taps the card on the contactless reader where the
Contactless logo is located.
The card does not need to touch the reader but must be within 0.5 in. (1.1 cm) of it.
The card must be tapped or waved by itself (e.g., the customer cannot leave the card
in their wallet and wave it in front of the reader).
If the card does not work or is unsupported:
• If the card is also a chip card, insert it into the chip card reader.
• If that doesn’t work, try swiping the card on the magnetic stripe card reader (look for the magnetic
stripe).
To configure the modular contactless reader, see Configuring the Contactless Reader.
To set up the modular contactless reader, see The Modular Contactless Reader.
2.2.3. Signatureless Transactions
A "signatureless" transaction is a swiped or tapped Purchase for which a cardholder signature is not
required because the Purchase amount is at or below the card's maximum Signatureless Dollar Value
(SDV). Depending on the card type and how your terminal is configured, receipts may or may not print
for a signatureless transaction.
Maximum Signatureless Dollar Value (SDV)
To determine the maximum SDV for a card, print an EMV Parameters Report and locate the Contactless
CVM Limit parameter under the report's section for the card. An SDV of 9999 means there is no
maximum limit.
See Signing Credit Card Receipts.
2.2.4. Tip Processing
Tip Processing on the Vx810 Duet has a number of features.
Basic Tip Processing
You can configure the terminal to prompt customers for a tip amount on Purchase, Pre-Authorization
Completion and Advice transactions. If the customer enters a tip amount greater than 0, the amount is
printed on the receipt below the base amount. For tip amount entry by customers on receipts, Basic Tip
Processing prints a blank tip line below the base amount on Pre-Authorization receipts.
Note: Tip Processing is skipped on Signatureless Transactions
.
Enhanced Tip Processing
This feature gives customers the option of keying in an amount or a percentage when prompted for a tip
on Purchases. If a customer opts for a percentage, the terminal displays up to three pre-configured
selectable percentage amounts. You can also configure your terminal to give customers a No Tip option.
Note: On Pre-Authorizations and Pre-Authorization Completions, Enhanced Tip Processing works the
same way as Basic Tip Processing.
IMPORTANT: Enhanced Tip Processing is not available if an external PINPad is connected to
your terminal.