Specifications

2. Features and Procedures
30 Moneris Vx810 Duet Operating Manual v1.1.01
The terminal is ready when the applications menu appears.
Note: For power up instructions when an external PINPad is connected to the terminal, see The External
PINpad.
2.3.2. Powering Down the Vx810 Duet
The Moneris Vx810 Duet terminal does not have an ON/OFF switch.
To power down (or turn off) the terminal, simply unplug the power cable from the power source, e.g. a
wall jack or a power bar. The screen will go blank and the backlight will turn off.
2.3.3. Loading Paper in the Integrated Printer
Paper well open and empty Paper well open with roll of paper
To load a paper roll into the terminal:
1. Open the paper well at the front of the base.
2. Push the printer latch up and towards the back of the base.
3. Remove the paper roll that is in the paper well.
4. Place the new paper roll into the paper well with the loose end unrolling from the bottom of the roll
towards the front of the base.
5. Pull the loose end of the paper towards the front of the base at least one inch (2.2 cm) past the metal
teeth at the front of the paper well.
6. Close the printer lid and press firmly on it to ensure that it is securely latched.
7. Tear off the loose end of the paper by pulling it down then sideways across the metal teeth.
8. Press the 3 key to feed paper through the printer and ensure it is working properly.
The printer is ready to print again.
Note: If the printer ran out of paper in the middle of a receipt or report, you may be able to reprint the
receipt or report.
2.3.4. Selecting the Terminal Language
The text on the terminal display, receipts and reports can be in one of two languages: English or French.
One language can be selected for the Merchant and another for the Customer.